Hose Barb to AN Adapters

The adapters give a clean really cool look to any auto plumbing one needs. I highly recommend these.

Exactly what I needed to convert the hose barb ends on my heater core to -AN.

This barb to 6AN adapter fits perfectly to ME Wagner Dual Flow valve.

I used these to convert to ~6AN from barb on my 04 honda pilot daily driver. They took a bit to slide on as the honda line is slightly larger, I did convince them to go on using some 80 grit sandpaper and used a bit of assembly lube on both the o-ring and threads to prevent the o-ring from binding up or it binding on the threads towards the bottom. I haven't yet installed an inline thermostat, but I needed to replace my radiator and low speed fan as they went out. Unfortunately I had to use those zip ties onthe cooler and later noticed it is crooked, but oh well. The ebay fan is rocking and actually works I got to replace it with. My radiator I got was technically for an 05 but it fits without issue. The 04 is a .63 inch core and 04 is 1.03 inch core. I'm using stainless braided ptfe hose for my lines and shiny colored red and blue fittings. The cooler had a powder coat that's glittery on the end tubes not the core which it funny and cool. They don't leak or move which is good. Only time will tell how long they'll last or at least the o-rings. There wasn't any sort of mounting locations on cooler I was comfortable with trying to modify for fitment. So that's why I used the ties. They have foam so well have to see how it does over time. Enjoy so terrible pics with one good one.

Quality. Follow instructions and it will hold. I used it on my diesel fuel line.