Mock Up Templates
Download and print these templates before ordering to be sure you order the right parts for your system.
*Ensure Printer Settings Are Set to "FIT TO PAPER" Before Printing*
Verify printing is correct by measuring the different components and comparing your measurement to the numbers on the sheet.
Our recommendation is to piece together the parts you need, print them, cut them out and use them to mock up your system. Pay close attention to clearances, make certain all angles are correct, and determine the amount of hose you will need.
-16AN and -20AN AutoPlumb Waterneck Adapters:
Adapter for Water Neck O.D. 1.250"- 1.400"
Adapter for Water Neck O.D. 1.500"- 1.550"
Adapter for Water Neck O.D. 1.750"- 1.800"
Adapter for Water Neck O.D. 1.990"- 2.040"
-16AN and -20AN Thermostat Housings:
STRAIGHT THERMOSTAT HOUSING TEMPLATE CHEVY SB/BB
STRAIGHT THERMOSTAT HOUSING TEMPLATE FORD 260-289 WINDSOR
STRAIGHT THERMOSTAT HOUSING TEMPLATE LS 1 & 2
45° SWIVEL THERMOSTAT HOUSING TEMPLATE CHEVY SB/BB
45° SWIVEL THERMOSTAT HOUSING TEMPLATE FORD 260-289 WINDSOR
45° SWIVEL THERMOSTAT HOUSING TEMPLATE -16AN & -20AN LS 1 & 2
90° SWIVEL THERMOSTAT HOUSING TEMPLATE CHEVY SB/BB
90° SWIVEL THERMOSTAT HOUSING TEMPLATE FORD 260-289 WINDSOR
90° SWIVEL THERMOSTAT HOUSING TEMPLATE -16AN & -20AN LS 1 & 2
SWIVEL THERMOSTAT HOUSING TEMPLATE -16AN & -20AN FORD/BB/SB 302-351 CLEVELAND
Hose Ends:
-16AN Straight Hose End Template
-20AN Straight Hose End Template
-16AN and -20AN Hose Radius Template
In-Line Fillers:
In-Line Filler with 90° Coupler
In-Line Filler with Straight Coupler