Parts Required for a Full Upper and Lower Cooling System Conversion
- 3x AutoPlumb Water Neck Adapters
- 1x AutoPlumb Thermostat Housing
- 4x Aeroflow Hose Ends
- Your measured length of AN hose
Tools Required
- AN Wrench
- Vise Jaws
- Hose Cutting Film

STEP 1:
MEASURE YOUR RADIATOR / PUMP O.D.
✱ Use calipers or a micrometer
✱ Measure BEHIND the raised bead
If your size is not listed on our website, a radiator water neck can be reduced in size approximately .040", and most water pumps can be reduced in size .050" or more. A file and emery cloth work well to reduce the size, but the method is up to you. Reduce it between the bead and radiator/pump.

STEP 2:
DOWNLOAD AND PRINT THE ADAPTER TEMPLATES
✱ Find the adapter template for your measurement here
✱ Transfer the templates to poster board for a stiffer template.
DO NOT use the templates to determine the O.D. size to order.

STEP 3:
DOWNLOAD AND PRINT THE THERMOSTAT HOUSING TEMPLATES
✱ Find the thermostat housing template for your brand here
✱ Print a straight, 45°, or 90° depending on which is best for your application.
Any angle hose end can be connected directly to a straight thermostat housing if that better suits your application. AutoPlumb AN Water Neck Adapters can be used on your stock thermostat housing if we do not have a housing for your brand.

STEP 4:
DOWNLOAD AND PRINT THE HOSE END TEMPLATES
✱ Find the hose end templates here
✱ Start by printing which angles you think will work, then proceed to Step 5.

STEP 5:
DETERMINE YOUR HOSE END ANGLES
✱ Mix and match the various angles until you get the ends to align.
✱ Take your time on this step, it is crucial for assembly.
✱ While the hose does bend (refer to the hose radius template), do not rely on the hose to make a bend for you.

STEP 6:
MEASURE YOUR HOSE LENGTH
✱ Measure the distance between the hose end templates.
✱ This measurement is an estimation. Always give yourself extra hose in case of errors or if a bend is needed.
✱ Taping the templates and/or having assistance makes this step easier.
AutoPlumb
-16AN & -20AN , 1.5" Hose. BB Ford & SBF Cleveland Swivel Thermostat Housings
Regular price $94.95 USDUnit priceAutoPlumb
-16AN , -20AN , 1.5" Hose. Ford (Cleveland) Straight Thermostat Housing
Regular priceFrom $58.41 USDUnit priceAutoPlumb
Aeroflow -16AN 550 Series Full Flow Swivel Hose Ends
Regular priceFrom $34.95 USDUnit priceAutoPlumb
-20AN 550 Series Full-Flow Cutter Swivel Hose Ends
Regular priceFrom $39.95 USDUnit priceAutoPlumb
Aeroflow -20AN 880 ELITE Series Full Flow Swivel Hose Ends
Regular priceFrom $54.95 USDUnit priceAutoPlumb
Aeroflow -16AN & -20AN 853 Series Full Flow 90° Dual Hose Ends
Regular priceFrom $64.95 USDUnit priceAutoPlumb
90° Full Flow Female/Male Flare Swivel (Not For Hose)
Regular priceFrom $34.95 USDUnit price