{"title":"Intake Manifolds","description":null,"products":[{"product_id":"aeroflow-title-intake-manifolds-sbf-hi-rise-intake-manifold","title":"Ford 289-302W Hi-Rise Single Plane Intake Manifold, 3000 - 8000 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Hi Rise Small Block Ford carburetted cast intake manifold. This single-plane intake manifold is designed tokeep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarketsquare-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 289,302 and 351 cubic inch small-block Ford Windsor engines operating from 3000 to7500 rpm range. In most cases,these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003eThis manifold is a Hi-Rise race style manifold designed for high rpm. It does feature dual distributor hold-downs and four corner water ports plus a fifth water outlet in the front of the manifold.\u003c\/p\u003e\u003cp\u003eIntake Runners should be port matched to your cylinder heads for optimal performance.\u003c\/p\u003e \u003cp\u003e• Fits Small Block Ford 289 and 302 Windsor Engines.\u003c\/p\u003e \u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e \u003cp\u003e• RPM operating range - 3000 to 7000.\u003c\/p\u003e \u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357122457813,"sku":"AF6200-2002","price":407.71,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357122490581,"sku":"AF6000-2002","price":358.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6200-2002.jpg?v=1794980341"},{"product_id":"aeroflow-title-intake-manifolds-holden-253-308-intake-manifold","title":"Holden 253-308 Low-Rise Single Plane Intake Manifold, Idle - 5500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Low Rise Holden carburetted cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for Holden V8 engines operating from idle to 5500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003eIntake Runners should be port matched to your cylinder heads for optimal performance.\u003c\/p\u003e\u003cp\u003e• Fits Holden 253, 308 V8 Engines. Will ONLY suit early Holden 308 cylinder heads. This is designed for Red, Blue and Black Holden V8 engine models.\u003c\/p\u003e\u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - Idle to 5500.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e\u003cp\u003e• Note: This can be used with both Holden V8 cylinder heads with modifications. New holes must be drilled out in intake manifold at the correct angle and correct location. These locations are marked on the intake manifold with pilot holes predrilled.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357122621653,"sku":"AF6200-4000","price":522.59,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357122654421,"sku":"AF6000-4000","price":485.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6200-4000.jpg?v=1794980342"},{"product_id":"aeroflow-title-intake-manifolds-holden-304-vn-intake-manifold-holden-v8-304","title":"Holden 304 Intake Manifold, Single- or Dual-Plane Options – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Low Rise Holden carburetted cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket spread-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for Holden 253,308 V8 engines operating from 1500 to 6500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003eIntake Runners should be port matched to your cylinder heads for optimal performance.\u003c\/p\u003e\u003cp\u003e• Fits Holden 304 V8 Engines. Will not suit early Holden 308 cylinder heads. This is designed for late model Holden VN Engine Models.\u003c\/p\u003e\u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Aeroflow Holden 304 Low-Rise Single Plane Intake Manifold, Black Finish | 1500 - 6500 RPM, Spread Bore Carburettor Pad, Non-EGR","offer_id":68357124686037,"sku":"AF6200-4001","price":548.88,"currency_code":"USD","in_stock":true},{"title":"Aeroflow Holden 304 Low-Rise Single Plane Intake Manifold, Natural Cast Finish | 1500 - 6500 RPM, Spread Bore Carburettor Pad, Non-EGR","offer_id":68357124751573,"sku":"AF6000-4001","price":555.8,"currency_code":"USD","in_stock":true},{"title":"Holden 304 Air Gap Dual Plane Intake Manifold, Black Finish | 1500 - 6500 RPM, Square Bore Carburettor Pad, Non-EGR","offer_id":68357124718805,"sku":"AF6210-4000","price":517.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6200-4001.jpg?v=1794980343"},{"product_id":"aeroflow-title-intake-manifolds-holden-304-vn-intake-manifold-holden-v8-304-efi","title":"Holden 304 Air Gap Dual Plane Non EFI Intake Manifold, Natural Cast Finish, 1500 - 6500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Air Gap Holden carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on todayâ€™s market. Specifically designed for Holden 304 V8 engines operating from idle to 5500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003eIntake Runners should be port matched to your cylinder heads for optimal performance.\u003c\/p\u003e\u003cp\u003eâ€¢ Fits Holden 304 V8 Engines. Will not suit early Holden 308 cylinder heads. This is designed for late model Holden VN Engine Models Non EFI models only. Use A6010-4003 for EFI applications.\u003c\/p\u003e\u003cp\u003eâ€¢Dual Plane Configuration.\u003c\/p\u003e\u003cp\u003eâ€¢ RPM operating range - 1500 to 6500.\u003c\/p\u003e\u003cp\u003eâ€¢ Natural Cast Finish.\u003c\/p\u003e\u003cp\u003eâ€¢ Note: This can be used with both Holden V8 cylinder heads with modifications. New holes must be drilled out in intake manifold at the correct angle and correct location. These locations are marked on the intake manifold with pilot holes predrilled.\u003c\/p\u003e\u003cp\u003eâ€¢This intake manifold includes a blank boss on each cylinder intake runner. This can be used for EFI applications with a fuel injector or a nitrous nozzle. Each boss must be drilled out and tapped to or welded to suit your application.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":68357128716501,"sku":"AF6010-4000","price":471.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6010-4000.jpg?v=1794980344"},{"product_id":"aeroflow-title-intake-manifolds-sbc-hi-rise-intake-manifold","title":"Chevrolet Small Block Hi-Rise Single Plane Intake Manifold, 3000 - 7500 RPM, Square Bore Carburetor Pad, Non-EGR – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Hi Rise Small Block Chevycarburetted cast intake manifold. This single-plane intake manifold is designed tokeep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarketsquare-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 302-400 cubic inch small-blockChevy engines operating from 3000 to 7500 rpm range. In most cases, these manifolds accept late model water necks,air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003eThis manifold is designed for standard port location 23° Chevrolet cylinder heads. This manifold is a Hi-Rise race style manifold designed for high rpm and large cubic inch engines. It does feature dual distributor hold-downs and four corner water ports plus a fifth wateroutlet in the front of the manifold.\u003c\/p\u003e \u003cp\u003eIntake Runners should be port matched to your cylinder heads for optimal performance.\u003c\/p\u003e \u003cp\u003e• Fits Small Block Chevy 302-400 Cubic Inch Engines.\u003c\/p\u003e \u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e \u003cp\u003e• RPM operating range – 3000 to 7500.\u003c\/p\u003e \u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"SB Chev Hi-Rise SinglePlane Intake Manifold, Black Finish | 3000 - 7500 RPM, Square Bore Carburettor Pad, Non-EGR","offer_id":68357129142485,"sku":"AF6201-1000","price":466.9,"currency_code":"USD","in_stock":true},{"title":"SB Chev Hi-Rise SinglePlane Intake Manifold, NaturalCast Finish | 3000 - 7500 RPM, Square Bore Carburettor Pad, Non-EGR","offer_id":68357129175253,"sku":"AF6001-1000","price":370.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6201-1000.jpg?v=1794980345"},{"product_id":"aeroflow-title-intake-manifolds-sbc-street-intake-manifold","title":"Chevrolet Small Block Street Intake Manifold, Dual Plane, Square Bore, 1,500–6,500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Street Small Block Chevy carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 262-400 cubic inch small-block Chevy engines operating in the1500 to 6500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003e• Fits Small Block Chevy 262-400 Cubic Inch Engines.\u003c\/p\u003e \u003cp\u003e• Dual Plane Configuration.\u003c\/p\u003e \u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e \u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357130879189,"sku":"AF6210-1000","price":387.1,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357130911957,"sku":"AF6010-1000","price":345.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6210-1000.jpg?v=1794980346"},{"product_id":"aeroflow-title-intake-manifolds-sbc-air-gap-intake-manifold","title":"Chevrolet Small Block Air Gap Dual Plane Intake Manifold, 1500 - 6500 RPM, Square Bore Carburetor Pad, Non-EGR – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Air Gap Small Block Chevy carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 262-400 cubic inch small-block Chevy engines operating in the1500 to 6500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003e• Fits Small Block Chevy 262-400 Cubic Inch Engines.\u003c\/p\u003e \u003cp\u003e• Dual Plane Configuration.\u003c\/p\u003e \u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e \u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357131272405,"sku":"AF6210-1001","price":406.7,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357131305173,"sku":"AF6010-1001","price":374.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6210-1001.jpg?v=1794980347"},{"product_id":"aeroflow-title-intake-manifolds-bbc-hi-rise-intake-manifold","title":"Chevrolet Big Block Hi-Rise Single Plane Intake Manifold, 3500 - 7500 RPM, Square Bore Carburetor Pad, Non-EGR – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Hi Rise Big Block Chevy carburetted cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Fits 396-454 \u0026amp; 502ci great for large cubic inch big-block Chevy engines with oval-port cylinder heads operating from 3500 to 7500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e\u003cp\u003eThis manifold is a Hi-Rise race style manifold designed for high rpm and large cubic inch engines. It does feature dual distributor hold-downs and four corner water ports plus a fifth water outlet in the front of the manifold.\u003c\/p\u003e\u003cp\u003eIntake Runners should be port matched to your cylinder heads for optimal performance.\u003c\/p\u003e\u003cp\u003e• Fits Big Block Chevy 396-502 Cubic Inch Engines.\u003c\/p\u003e\u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - 3500 to 7500.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357131370709,"sku":"AF6210-1002","price":567.87,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357131403477,"sku":"AF6010-1002","price":513.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6210-1002.jpg?v=1794980347"},{"product_id":"aeroflow-title-intake-manifolds-sbf-street-intake-manifold","title":"Ford Small Block 289-302 Windsor Street Dual Plane Intake Manifold, 1500 - 6500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Street Small Block Ford carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 260-302 cubic inch small-block Ford engines operating in the 1500 to 6500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003e• Fits Small Block Ford 289 and 302 Windsor Engines.\u003c\/p\u003e \u003cp\u003e• Dual Plane Configuration.\u003c\/p\u003e \u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e \u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357131763925,"sku":"AF6210-2000","price":424.56,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357131796693,"sku":"AF6010-2000","price":414.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6210-2000.jpg?v=1794980348"},{"product_id":"aeroflow-title-intake-manifolds-sbf-air-gap-intake-manifold","title":"Ford Small Block 289-302 Windsor Air Gap Dual Plane Intake Manifold, 1500 - 6500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Air Gap Small Block Ford carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 289-302 cubic inch small-block Ford engines operating in the 1500 to 6500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003e• Fits Small Block Ford 289 and 302 Windsor Engines.\u003c\/p\u003e \u003cp\u003e• Dual Plane Configuration.\u003c\/p\u003e \u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e \u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357132517589,"sku":"AF6210-2001","price":448.7,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357132550357,"sku":"AF6010-2001","price":402.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6210-2001.jpg?v=1794980349"},{"product_id":"aeroflow-title-intake-manifolds-ford-cleveland-air-gap-intake","title":"Ford 351 Cleveland Air Gap Dual Plane Intake Manifold, 1500 - 6500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Air Gap Ford Cleveland carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 351 cubic inch Ford Cleveland engines operating in the 1500 to 6500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003e• Fits Ford 351 Cleveland V8 Engines.\u003c\/p\u003e\u003cp\u003e• Port exits are matched to 2V cylinder heads and the intake to cylinder head flanges are large enough to seal on 3V and 4V cylinder heads..\u003c\/p\u003e\u003cp\u003e• Dual Plane Configuration.\u003c\/p\u003e \u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e \u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357132615893,"sku":"AF6210-2002","price":502.4,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357132648661,"sku":"AF6010-2002","price":461.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6210-2002.jpg?v=1794980350"},{"product_id":"aeroflow-title-intake-manifolds-holden-304-efi-intake-manifold","title":"Holden 304 EFI Air Gap Dual Plane Intake Manifold, 1500 - 6500 RPM, Square Bore Carburetor Pad, Non-EGR – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Air Gap Holden carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for Holden 304 V8 engines operating from idle to 5500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e \u003cp\u003eIntake Runners should be port matched to your cylinder heads for optimal performance.\u003c\/p\u003e\u003cp\u003e• Fits Holden 304 V8 Engines. Will not suit early Holden 308 cylinder heads. This is designed for late model Holden VN Engine Models EFI models only. Use A6010-4000 for NON-EFI applications.\u003c\/p\u003e•This intake manifold does not work with factory OEM fuel rails and requires the use of Aeroflow Fuel Rail Kit included (AF6999-4003).\u003cp\u003e• Requires the use of 14mm short (33.60mm) fuel injectors (Sold Separately).\u003c\/p\u003e\u003cp\u003e• Dual Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e\u003cp\u003e• Note: This can be used with both Holden V8 cylinder heads with modifications. New holes must be drilled out in intake manifold at the correct angle and correct location. These locations are marked on the intake manifold with pilot holes predrilled.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357134385365,"sku":"AF6210-4003","price":758.8,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357134418133,"sku":"AF6010-4003","price":657.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6210-4003.jpg?v=1794980351"},{"product_id":"aeroflow-title-intake-manifolds-sbc-classic-intake-manifold","title":"Chevrolet Small Block Classic Dual Plane Intake Manifold, Idle - 5500 RPM, Spread Bore Carburetor Pad, EGR Model – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Classic Small Block Chevy carburetted cast intake manifold. This dual-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket square-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 262-400 cubic inch small-block Chevy engines operating in the idle to 5500 rpm range. In most cases, these manifolds accept late model water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e\u003cp\u003eThis intake manifold is equipped with EGR (Exhaust Gas Recirculation); therefore, they are compatible with exhaust emissions or emissions related components. A EGR block off plate and gasket are provided if you do not require the emissions components. Special adapter bushings are included to allow this manifold to fit the later model cylinder heads (1987 to 1995). You can choose to either use the angled bushings to bolt on accessories or use the straight ones if not using any accessories.\u003c\/p\u003e\u003cp\u003e Included in this manifold kit is an adapter plate that converts the standard spread bore carburettor pattern over to a square bore carburettor. This will adapt any aftermarket carburettor with a square bore base.\u003c\/p\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003cbr\u003e- Fits Small Block Chev 262-400\u003cbr\u003e- Dual Plane Configuration\u003cbr\u003e- Idle to 5500 RPM operating range \u003cbr\u003e- Natural Cast Finish","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357135794389,"sku":"AF6211-1000","price":330.93,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357135827157,"sku":"AF6011-1000","price":284.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6211-1000.jpg?v=1794980352"},{"product_id":"aeroflow-title-intake-manifolds-bbc-air-gap-intake-manifold","title":"Chevrolet Big Block Air Gap Dual Plane Intake Manifold, 1500 - 6500 RPM, Square Bore Carburetor Pad, Non-EGR – Aeroflow","description":"\u003cp\u003eGet the maximum power from your carburetted engine with this Air Gap Big Block Chevy carburetted cast intake manifold. This dual-plane intake manifold is designed tokeep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarketsquare-bore carburettors with either manual or electric choke options available on today’s market. Specifically designed for 396-502 cubic inch big-block Chevy engines with large oval-port cylinder heads (1975and earlier) operating from 1500 to 6500 rpm range. In most cases, these manifolds accept late model water necks,air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e\u003cp\u003eThis manifold is a Hi-Rise race style manifold designed for high rpmand large cubic inch engines. It does feature dual distributor hold-downs and four corner water ports plus afifth water outlet in the front of the manifold.\u003c\/p\u003e\u003cp\u003eIntake Runnersshould be port matched to yourcylinder heads for optimal performance.\u003c\/p\u003e\u003cp\u003e• FitsBig Block Chevy 396-502 Cubic Inch Engines.\u003c\/p\u003e\u003cp\u003e• Dual Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - 1500 to 6500.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"BB Chev Air Gap Dual Plane Intake Manifold, Black Finish | 1500 - 6500 RPM, Square Bore Carburettor Pad, Non-EGR","offer_id":68357136515285,"sku":"AF6211-1001","price":480.37,"currency_code":"USD","in_stock":true},{"title":"BB Chev Air Gap Dual Plane Intake Manifold, NaturalCast Finish | 1500 - 6500 RPM, Square Bore Carburettor Pad, Non-EGR","offer_id":68357136548053,"sku":"AF6011-1001","price":491.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6211-1001.jpg?v=1794980353"},{"product_id":"aeroflow-title-intake-manifolds-ford-fg-barra-intake-manifold","title":"Ford Falcon FG Barra Intake Manifold – Aeroflow","description":"\u003cp\u003eUpgrade your Barra intake manifold with the Aeroflow Performance cast FG style intake manifold. It is manufactured to replicate the OE factory FG design, ensuring optimal compatibility with the Ford Falcon Barra engine platform. It accepts the Ford FG OE throttle body with a centre feed which is a great upgrade for any Barra engine looking for higher horsepower. Also, a great retrofit option with the ability to relocate the throttle body inlet in another direction making this manifold perfect for narrow engine bay installs during conversions. Each intake manifold features vacuum ports with factory hose barbs to suit the factory OE hoses. A -8ORB billet fuel rail with -8AN adapter fittings are included in this kit to suit 3\/4” length 14mm injectors (FG turbo factory injectors will also work). A stainless-steel centre brace to support the throttle body and intake gasket is provided for installation.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357136941269,"sku":"AF6228-7000","price":599.73,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357136974037,"sku":"AF6028-7000","price":542.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6228-7000_16072025072503.jpg?v=1794980354"},{"product_id":"aeroflow-title-intake-manifolds-gm-ls-carby-intake-manifold","title":"GM LS Single-Plane Carburetor Intake Manifolds, Cathedral- or Rectangle-Port – Aeroflow","description":"\u003cp\u003eConvert your GM LS engine from EFI to Non-EFI carburettor in retro-fit applications with this Aeroflow Performance Street low rise cast intake manifold.This single-plane intake manifold is designed to keep your air and fuel distributiongoing into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket4150 square-bore carburettors with either manual or electricchoke options available on today’s market. Specificallydesigned to suit GM LS Gen IIIand IV engines equipped with OE or aftermarket LS1\/LS2 cathedral port cylinder heads.This product is intended for carburetted, throttle body EFI, or port EFI applications.\u003c\/p\u003e\u003cp\u003e• Fits GM LS1\/LS2 Cathedral PortEngines.\u003c\/p\u003e\u003cp\u003e• Non-EFI Applications.\u003c\/p\u003e\u003cp\u003e• Fits GM LS1\/LS2 Engines.\u003c\/p\u003e\u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - 2500 to 7000.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Aeroflow GM LS Cathedral Port Carburettor Hi Rise Race Single Plane EFI Intake Manifold, Black Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138317525,"sku":"AF6250-5001","price":757.57,"currency_code":"USD","in_stock":true},{"title":"Aeroflow GM LS Cathedral Port Carburettor Hi Rise Race Single Plane EFI Intake Manifold, Natural Cast Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138514133,"sku":"AF6050-5001","price":694.71,"currency_code":"USD","in_stock":true},{"title":"Aeroflow GM LS Rectangle Port Carburettor Hi Rise Race Single Plane EFI Intake Manifold, Black Finish | 4 Barrel 4150 Square Bore Carburettor Pad","offer_id":68357138383061,"sku":"AF6250-6001","price":781.56,"currency_code":"USD","in_stock":true},{"title":"Aeroflow GM LS Rectangle Port Carburettor Hi Rise Race Single Plane EFI Intake Manifold, Natural Cast Finish | 4 Barrel 4150 Square Bore Carburettor Pad","offer_id":68357138579669,"sku":"AF6050-6001","price":710.11,"currency_code":"USD","in_stock":true},{"title":"Aeroflow GM LS Rectangle Port Carburettor Street Single Plane Non-EFI Intake Manifold, Black Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138251989,"sku":"AF6240-6000","price":427.28,"currency_code":"USD","in_stock":true},{"title":"Aeroflow GM LS Rectangle Port Carburettor Street Single Plane Non-EFI Intake Manifold, Natural Cast Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138448597,"sku":"AF6040-6000","price":386.09,"currency_code":"USD","in_stock":true},{"title":"GM LS Cathedral Port Carburettor Street Single Plane EFI Intake Manifold, Black Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138284757,"sku":"AF6250-5000","price":637.36,"currency_code":"USD","in_stock":true},{"title":"GM LS Cathedral Port Carburettor Street Single Plane EFI Intake Manifold, Natural Cast Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138481365,"sku":"AF6050-5000","price":639.32,"currency_code":"USD","in_stock":true},{"title":"GM LS Cathedral Port Carburettor Street Single Plane Non-EFI Intake Manifold,Black Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138219221,"sku":"AF6240-5000","price":430.33,"currency_code":"USD","in_stock":true},{"title":"GM LS Cathedral Port Carburettor Street Single Plane Non-EFI Intake Manifold,Natural Cast Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138415829,"sku":"AF6040-5000","price":397.01,"currency_code":"USD","in_stock":true},{"title":"GM LS Rectangle Port Carburettor Street Single Plane EFI Intake Manifold, Black Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138350293,"sku":"AF6250-6000","price":674.6,"currency_code":"USD","in_stock":true},{"title":"GM LS Rectangle Port Carburettor Street Single Plane EFI Intake Manifold, Natural Cast Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357138546901,"sku":"AF6050-6000","price":611.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6240-5000.jpg?v=1794980356"},{"product_id":"aeroflow-title-intake-manifolds-gm-ls-carby-hi-rise-intake","title":"GM LS Port Carburetor Hi Rise Single Plane Non-EFI Intake Manifold – Aeroflow","description":"\u003cp\u003eConvert your GM LS engine from EFI to Non-EFI carburettor in retro-fit applications with this Aeroflow Performance hi rise (Super Victor Style) cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket 4150 square-bore carburettors with either manual or electric choke options available on today’smarket. Specifically designed to suit GM LS Gen III and IV engines equipped with OE or aftermarket LS1\/LS2 cathedral port cylinder heads. This product is intended for carburetted, throttle body EFI, or port EFI applications.\u003c\/p\u003e\u003cp\u003eThis manifold is a Hi-Rise race style manifold designed for high rpm and large cubic inch engines.\u003c\/p\u003e\u003cp\u003e• Fits GM LS1\/LS2 Cathedral Port Engines.\u003c\/p\u003e\u003cp\u003e• Non-EFI Applications.\u003c\/p\u003e\u003cp\u003e• Fits GM LS1\/LS2 Engines.\u003c\/p\u003e\u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - 3500 to 8000.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e\u003cp\u003e•- Intake manifold Flat style gasket (must use Fel Pro 1312-2 or 1312-3).\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Aeroflow GM LS Rectangle Port Carburettor Hi Rise Single Plane Non-EFI Intake Manifold, Natural Cast Finish | 4 Barrel 4150 Square Bore Carburettor Pad","offer_id":68357140185301,"sku":"AF6040-6005","price":508.14,"currency_code":"USD","in_stock":true},{"title":"GM LS Cathedral Port Carburettor Hi Rise Single Plane Non-EFI Intake Manifold,Black Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357140119765,"sku":"AF6240-5005","price":570.98,"currency_code":"USD","in_stock":true},{"title":"GM LS Cathedral Port Carburettor Hi Rise Single Plane Non-EFI Intake Manifold,Natural Cast Finish | 4 Barrell 4150 Square Bore Carburettor Pad","offer_id":68357140152533,"sku":"AF6040-5005","price":494.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6240-5005.jpg?v=1794980358"},{"product_id":"aeroflow-model-af6063","title":"GM LS Modular EFI Intake Manifold, Natural Cast, for 102 or 105 mm Throttle Body – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance GM LS modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. This cast aluminium manifold performs well and offers an extremely good value for a performance intake manifold for the very popular GM LS engine family.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a hi rise manifold where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer. A low-rise design manifold which allows it to fit under a stock bonnet in most street car applications. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of the bottom base which bolts to the cylinder heads and the top plate which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port cylinder heads. With a choice of NON-EFI with no injector bosses or EFI with 16 injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8\" NPT and 1 x 1\/8\" NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThe top plate features a short throttle body snout to accept a 102mm 4 bolt GM LS throttle body. A burst panel is welded on the top plate which releases pressure (200psi) in the event of a backfire to save your intake manifold.\u003c\/p\u003e\u003cp\u003eEach intake manifold can be purchased complete or as individual items. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"GM LS Cathedral Port Low Rise EFI Modular Intake Manifold, Natural Cast Finish Suit 102mm\/105mm Throttle Body \u0026 14mm Short Injectors","offer_id":68357140283605,"sku":"AF6063-5000","price":1474.54,"currency_code":"USD","in_stock":true},{"title":"GM LS Rectangle Port Hi Rise EFI Modular Intake Manifold, Natural Cast Finish Suit 102mm\/105mm Throttle Body \u0026 14mm Short Injectors","offer_id":68357140349141,"sku":"AF6063-6001","price":1532.83,"currency_code":"USD","in_stock":true},{"title":"GM LS Rectangle Port Low Rise EFI Modular Intake Manifold, Natural Cast Finish Suit 102mm\/105mm Throttle Body \u0026 14mm Short Injectors","offer_id":68357140316373,"sku":"AF6063-6000","price":1474.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6063-5000.jpg?v=1794980359"},{"product_id":"aeroflow-title-intake-manifolds-gm-ls-modular-intake-manifold","title":"GM LS Cathedral-Port Modular EFI Intake Manifold, Low- or High-Rise – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance GM LS modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. This cast aluminium manifold performs well and offers an extremely good value for a performance intake manifold for the very popular GM LS engine family.\u003c\/p\u003e\u003cp\u003eAeroflow offer the hi rise manifold where bonnet modifications may be required for fitment. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of the bottom base which bolts to the cylinder heads and the top plate which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port cylinder heads. With a choice of NON-EFI with no injector bosses or EFI with 16 injector bosses complete with fuel rails and cross over, designed to suit 14mm short length (33mm) and 14mm full length (60.6mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8\" NPT and 1 x 1\/8\" NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThe top plate features a short throttle body snout to accept a 102mm 4 bolt GM LS throttle body. A burst panel is welded on the top plate which releases pressure (200psi) in the event of a backfire to save your intake manifold.\u003c\/p\u003e\u003cp\u003eEach intake manifold can be purchased complete or as individual items. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Aeroflow GM LS Cathedral Port Hi Rise EFI Modular Intake Manifold, Black Finish | Suit 102mm\/105mm Throttle Body \u0026 14mm Short \u0026 Full Length Injectors","offer_id":68357140545749,"sku":"AF6263-5001","price":1495.79,"currency_code":"USD","in_stock":true},{"title":"Aeroflow GM LS Cathedral Port Hi Rise EFI Modular Intake Manifold, Natural Cast Finish | Suit 102mm\/105mm Throttle Body \u0026 14mm Short \u0026 Full Length Injectors","offer_id":68357140578517,"sku":"AF6063-5001","price":1414.17,"currency_code":"USD","in_stock":true},{"title":"GM LS Cathedral Port Low Rise EFI Modular Intake Manifold, Black Finish | Suit 102mm\/105mm Throttle Body \u0026 14mm Short Injectors","offer_id":68357140512981,"sku":"AF6263-5000","price":1556.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6263-5000.jpg?v=1794980360"},{"product_id":"aeroflow-model-af6079","title":"GM LS Modular Intake Manifold Bases, Natural Cast Finish – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. These cast aluminium intake manifold bases perform well and offer extremely good value when paired with our modular top plates (sold separately) to make a complete intake manifold for the very popular GM LS engine family. Alternatively, a custom top plate can be custom made to suit your custom application.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a hi rise manifold base where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer. A low-rise design manifold base which allows it to fit under a stock bonnet inmost street car applications. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of this bottom base which bolts to the cylinder heads and a top plate(sold separately) which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port GM LS cylinder head. With a choice of NON-EFI with no injector bosses or EFI with 16injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8” NPT and 1 x 1\/8” NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThese intake manifold bases are sold separately (as well as in complete intake manifolds and top plates) and can be paired with our modular top plates which are sold separately. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"HI RISE EFI GM LS BASE INTAKE","offer_id":68357141725397,"sku":"AF6079-6004","price":990.75,"currency_code":"USD","in_stock":true},{"title":"Low Rise EFI GM LS Cathedral Port Intake Manifold Base, Natural Cast Finish Suit Modular Intake Manifolds","offer_id":68357141659861,"sku":"AF6079-5001","price":929.63,"currency_code":"USD","in_stock":true},{"title":"Low Rise EFI GM LS Rectangle Port Intake Manifold Base, Natural Cast Finish Suit Modular Intake Manifolds","offer_id":68357141692629,"sku":"AF6079-6003","price":929.63,"currency_code":"USD","in_stock":true},{"title":"LOW RISE NON EFI GM LS BASE","offer_id":68357141627093,"sku":"AF6079-5000","price":711.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6079-5000.jpg?v=1794980362"},{"product_id":"aeroflow-title-intake-manifolds-hi-rise-non-efi-gm-ls-base","title":"Hi Rise NON-EFI GM LS Cathedral Port Intake Manifold Base – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. These cast aluminium intake manifold bases perform well and offer extremely good value when paired with our modular top plates (sold separately) to make a complete intake manifold for the very popular GM LS engine family. Alternatively, a custom top plate can be custom made to suit your custom application.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a hi rise manifold base where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of this bottom base which bolts to the cylinder heads and a top plate (sold separately) which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port GM LS cylinder head. With a choice of NON-EFI with no injector bosses or EFI with 12 injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8” NPT and 1 x 1\/8” NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThese intake manifold bases are sold separately (as well as in complete intake manifolds and top plates) and can be paired with our modular top plates which are sold separately. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357141954773,"sku":"AF6279-5002","price":774.2,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357141987541,"sku":"AF6079-5002","price":733.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6279-5002_28012026045711.jpg?v=1794980363"},{"product_id":"aeroflow-title-intake-manifolds-hi-rise-efi-gm-ls-base-intake","title":"Hi Rise EFI GM LS Cathedral Port Intake Manifold Base – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. These cast aluminium intake manifold bases perform well and offer extremely good value when paired with our modular top plates (sold separately) to make a complete intake manifold for the very popular GM LS engine family. Alternatively, a custom top plate can be custom made to suit your custom application.\u003c\/p\u003e\u003cp\u003eAeroflow offer the hi rise manifold base where bonnet_x000D_\nmodifications may be required for fitment. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of this bottom base which bolts to the cylinder heads and a top plate (sold separately) which bolts to the base with an O-ring to seal both components. Each base will fit either a_x000D_\ncathedral port or rectangle port GM LS cylinder head. With a choice of NON-EFI with no injector bosses or EFI with 8 injector bosses complete with fuel rails and cross over, designed to suit 14mm short length (33mm) and 14mm full length (60.6mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8” NPT and 1 x 1\/8” NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThese intake manifold bases are sold separately (as well as in complete intake manifolds and top plates) and can be paired with our modular top plates which are sold separately. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357142118613,"sku":"AF6279-5003","price":952.98,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357142151381,"sku":"AF6079-5003","price":912.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6279-5003_05052026054646.jpg?v=1794980364"},{"product_id":"aeroflow-model-af6079-452","title":"GM LS Rectangle-Port Modular Intake Manifold Base, Non-EFI, Natural Cast – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. These cast aluminium intake manifold bases perform well and offer extremely good value when paired with our modular top plates (sold separately) to make a complete intake manifold for the very popular GM LS engine family. Alternatively, a custom top plate can be custom made to suit your custom application.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a hi rise manifold base where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer. A low-rise design manifold base which allows it to fit under a stock bonnet inmost street car applications. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of this bottom base which bolts to the cylinder heads and a top plate(sold separately) which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port GM LS cylinder head. With a choice of NON-EFI with no injector bosses or EFI with 12injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8” NPT and 1 x 1\/8” NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThese intake manifold bases are sold separately (as well as in complete intake manifolds and top plates) and can be paired with our modular top plates which are sold separately. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"HI RISE NON EFI GM LS BASE \/ Natural","offer_id":68357142544597,"sku":"AF6079-6002","price":773.14,"currency_code":"USD","in_stock":true},{"title":"LOW RISE NON EFI GM LS BASE \/ Natural","offer_id":68357142511829,"sku":"AF6079-6000","price":711.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6079-6000.jpg?v=1794980364"},{"product_id":"aeroflow-title-intake-manifolds-top-plate-throttle-body-modulr","title":"Top Plate with 4 Bolt Throttle Body Flange For Modular Intake Manifolds – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. This cast aluminium top plate performs well and offers extremely good value when paired with our modular bases (sold separately) to make a complete intake manifold for the very popular GM LS engine family.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a complete hi rise manifold where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer. A complete low-rise design manifold which allows it to fit under a stock bonnet in most street car applications. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of the bottom base which bolts to the cylinder heads and the top plate which bolts to the base with an O-ring to seal both components. This top plate features a short throttle body snout to accept a 102mm 4 bolt GM LS throttle body. A burst panel is welded on the top plate which releases pressure (200psi) in the event of a backfire to save your intake manifold.\u003c\/p\u003e\u003cp\u003eThese top plates are sold separately (as well as in complete intake manifolds) and can be paired with our modular bases which are sold separately. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Top Plate with 4 Bolt Throttle Body Flange For Modular Intake Manifolds, Black Finish | Suit 102mm\/105mm Throttle Body","offer_id":68357143232725,"sku":"AF6283-5000","price":581.59,"currency_code":"USD","in_stock":true},{"title":"Top Plate with 4 Bolt Throttle Body Flange For Modular Intake Manifolds, Black Finish | Suit 102mm\/105mm Throttle Body, No Burst Panel","offer_id":68357143265493,"sku":"AF6283-5001","price":552.75,"currency_code":"USD","in_stock":true},{"title":"Top Plate with 4 Bolt Throttle Body Flange For Modular Intake Manifolds, Natural Cast Finish | Suit 102mm\/105mm Throttle Body","offer_id":68357143298261,"sku":"AF6083-5000","price":540.82,"currency_code":"USD","in_stock":true},{"title":"Top Plate with 4 Bolt Throttle Body Flange For Modular Intake Manifolds, Natural Cast Finish | Suit 102mm\/105mm Throttle Body, No Burst Panel","offer_id":68357143331029,"sku":"AF6083-5001","price":540.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6283-5000.jpg?v=1794980367"},{"product_id":"aeroflow-title-intake-manifolds-dual-carburettor-top-plate","title":"Top Plate with Dual Carburetor Flange, 4150 Square Bore Carbs – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. This cast aluminium top plate performs well and offers extremely good value when paired with our modular bases (sold separately) to make a complete intake manifold.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of the bottom base which bolts to the cylinder heads and the top plate which bolts to the base with an O-ring to seal both components. This top plate features a dual 4150 square bore carburettor flange. These carb flanges are raised up to provide a larger plenum volume underneath. With M8 x 1.25mm screws to bolt to all modular intake manifold bases in the Aeroflow range. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357143527637,"sku":"AF6285-0000","price":246.34,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357143560405,"sku":"AF6085-0000","price":221.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6285-0000_04022026004051.jpg?v=1794980368"},{"product_id":"aeroflow-title-intake-manifolds-sbc-efi-air-gap-intake-manifol","title":"Chevrolet Small Block EFI Air Gap Single Plane Intake Manifold, 2500 - 7500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your engine with this Air Gap Small Block Chevy EFI cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket 4150 square-bore throttle bodies designed for EFI applications. \u003cbr\u003eThe fuel injector bores have back-cut exits in the intake runners for better fuel atomization. The fuel rails, brackets and mounting hardware are included with the manifold for easy installation with the injectors that you choose to use for your combination (fuel injector sold separately). Fuel rail is designed for maximum throttle lever clearance and has two different brackets to allow either a full length or short length 14mm fuel injector.\u003cbr\u003eSpecifically designed for 262-400 cubic inch small-block Chevy engines operating in the 2500 to 7500 rpm range. In most cases, these manifolds accept factory OE water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits Small Block Chevy 262-400 Cubic Inch Engines.\u003c\/li\u003e\n\u003cli\u003eSingle Plane Configuration.\u003c\/li\u003e\n\u003cli\u003eEFI Applications ONLY.\u003c\/li\u003e\n\u003cli\u003eSuits 14mm Full Length Injectors (60.65mm) or 14mm Short Length injectors (33.60mm).\u003c\/li\u003e\n\u003cli\u003eRPM operating range - 2500 to 7500.\u003c\/li\u003e\n\u003cli\u003eNatural Cast Finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357144150229,"sku":"AF6290-1000","price":673.43,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357144182997,"sku":"AF6090-1000","price":646.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6290-1000.jpg?v=1794980371"},{"product_id":"aeroflow-title-intake-manifolds-sbf-efi-air-gap-intake-manifol","title":"Ford Small Block 289-302 Windsor EFI Air Gap Single Plane Intake Manifold, 2500 - 7500 RPM – Aeroflow","description":"\u003cp\u003eGet the maximum power from your engine with this Air Gap Small Block Ford Windsor EFI cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket 4150 square-bore throttle bodies designed for EFI applications.\u003cbr\u003eThe fuel injector bores have back-cut exits in the intake runners for better fuel atomization. The fuel rails, brackets and mounting hardware are included with the manifold for easy installation with the injectors that you choose to use for your combination (fuel injector sold separately). Fuel rail is designed to allow a short length (33mm) 14mm fuel injector (sold separately).\u003cbr\u003eSpecifically designed for 289-302 cubic inch small-block Ford Windsor engines operating in the 2500 to 7500 rpm range. In most cases, these manifolds accept factory OE water necks, air conditioning, alternator and H.E.I. ignition systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits Small Block Ford Windsor 289-302 Cubic Inch Engines.\u003c\/li\u003e\n\u003cli\u003eSingle Plane Configuration.\u003c\/li\u003e\n\u003cli\u003eEFI Applications ONLY.\u003c\/li\u003e\n\u003cli\u003eSuits 14mm Short Length Injectors (33mm).\u003c\/li\u003e\n\u003cli\u003eRPM operating range - 2500 to 7500.\u003c\/li\u003e\n\u003cli\u003eNatural Cast Finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aeroflow","offers":[{"title":"Black","offer_id":68357144281301,"sku":"AF6290-2000","price":677.99,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":68357144314069,"sku":"AF6090-2000","price":646.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6290-2000.jpg?v=1794980372"},{"product_id":"aeroflow-af6233-5000","title":"GM LS1 LS2 Fabricated Sheet Metal Intake Manifold, 102mm – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance sheet metal fabricated intake manifolds perform well and offer an extremely good value for a performance intake manifold for the very popular GM LS engine family. This low profile and compact design were developed to allow the end user to fit under a stock bonnet. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response. We use thick 3mm (1\/8\") T6061 sheet aluminium for the intake plenum for maximum rigidity, so you will not have any issues with the intake manifold distorting under boost or warping during installation.\u003c\/p\u003e\u003cp\u003eThis LS intake manifold suits LS1\/LS2 cathedral port heads. Powder coated black creates stealthy engine bay styling.\u003c\/p\u003e\u003cp\u003eEach manifold is ready to bolt on out of the box and are designed to accept 102mm throttle bodies and include high flow fuel rail kit, all gaskets and hardware for a hassle-free installation.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":68357148213461,"sku":"AF6233-5000","price":653.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6233-5000.jpg?v=1794980388"},{"product_id":"aeroflow-af6233-6000","title":"GM LS3 Sheet Metal Intake Manifold with Fuel Rail and Mounting Kit – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance sheet metal fabricated intake manifolds perform well and offer an extremely good value for a performance intake manifold for the very popular GM LS engine family. This low profile and compact design were developed to allow the end user to fit under a stock bonnet. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response. We use thick 3mm (1\/8\") T6061 sheet aluminium for the intake plenum for maximum rigidity, so you will not have any issues with the intake manifold distorting under boost or warping during installation.\u003c\/p\u003e\u003cp\u003eThis LS intake manifold suits LS3 rectangle port heads. Powder coated black creates stealthy engine bay styling.\u003c\/p\u003e\u003cp\u003eEach manifold is ready to bolt on out of the box and are designed to accept 102mm throttle bodies and include high flow fuel rail kit, all gaskets and hardware for a hassle-free installation.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":68357148541141,"sku":"AF6233-6000","price":655.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6233-6000.jpg?v=1794980393"},{"product_id":"aeroflow-af6240-6005","title":"GM LS Rectangle Port Carburetor Hi Rise Single Plane Non-EFI Intake Manifold, 1.08\" x 2.50\" Port, Black – Aeroflow","description":"\u003cp\u003eConvert your GM LS engine from EFI to Non-EFI carburettor in retrofit applications with this Aeroflow Performance hi rise (Super Victor Style) cast intake manifold. This single-plane intake manifold is designed to keep your air and fuel distribution going into the engine at a steady and even flow for maximum performance and efficiency. The carburettor-mounting pad is designed to accept aftermarket 4150 square-bore carburettors with either manual or electric choke options available on today's market. Specifically designed to suit GM LS Gen III and IV engines equipped with OE or aftermarket LS3 rectangle port cylinder heads. This product is intended for carburetted, throttle body EFI, or port EFI applications.\u003c\/p\u003e\u003cp\u003eThis manifold is a Hi-Rise race style manifold designed for high rpm and large cubic inch engines.\u003c\/p\u003e\u003cp\u003e• Fits GM LS3 Rectangle Port Engines.\u003c\/p\u003e\u003cp\u003e• Non-EFI Applications.\u003c\/p\u003e\u003cp\u003e• Fits GM LS1\/LS2 Engines.\u003c\/p\u003e\u003cp\u003e• Single Plane Configuration.\u003c\/p\u003e\u003cp\u003e• RPM operating range - 3500 to 8000.\u003c\/p\u003e\u003cp\u003e• Natural Cast Finish.\u003c\/p\u003e\u003cp\u003e•- Intake manifold Flat style gasket (must use Fel Pro 1222-2 or 1222-3).\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":68357148573909,"sku":"AF6240-6005","price":572.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/1757299215_148420.jpg?v=1794980394"},{"product_id":"aeroflow-model-af6263","title":"GM LS Rectangle-Port Modular EFI Intake Manifold, Black, Low- or High-Rise – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance GM LS modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. This cast aluminium manifold performs well and offers an extremely good value for a performance intake manifold for the very popular GM LS engine family.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a hi rise manifold where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer. A low-rise design manifold which allows it to fit under a stock bonnet in most street car applications. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of the bottom base which bolts to the cylinder heads and the top plate which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port cylinder heads. With a choice of NON-EFI with no injector bosses or EFI with 16 injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8\" NPT and 1 x 1\/8\" NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThe top plate features a short throttle body snout to accept a 102mm 4 bolt GM LS throttle body. A burst panel is welded on the top plate which releases pressure (200psi) in the event of a backfire to save your intake manifold.\u003c\/p\u003e\u003cp\u003eEach intake manifold can be purchased complete or as individual items. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"GM LS Rectangle Port Hi Rise EFI Modular Intake Manifold, Black Finish Suit 102mm\/105mm Throttle Body \u0026 14mm Short Injectors","offer_id":68357148672213,"sku":"AF6263-6001","price":1614.31,"currency_code":"USD","in_stock":true},{"title":"GM LS Rectangle Port Low Rise EFI Modular Intake Manifold, Black Finish Suit 102mm\/105mm Throttle Body \u0026 14mm Short Injectors","offer_id":68357148639445,"sku":"AF6263-6000","price":1558.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6263-6000.jpg?v=1794980394"},{"product_id":"aeroflow-model-af6279","title":"GM LS Modular Intake Manifold Bases, Black Finish – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allowthe end user to customize their intake manifold depending on each individual application. These cast aluminium intake manifold bases perform well and offer extremely good value when paired with our modular top plates (sold separately) to make a complete intake manifold for the very popular GM LS engine family. Alternatively, a custom top plate can be custom made to suit your custom application.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a hi rise manifold base where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer. A low-rise design manifold base which allows it to fit under a stock bonnet inmost street car applications. Short intake runners with tapered top are designed to increase air velocity and moreevenly distribute airflow to all 8 cylinders improving performance and throttle response.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of this bottom base which bolts to thecylinder heads and a top plate(sold separately) which bolts to the base with an O-ring to seal both components. Each base will fit either a cathedral port or rectangle port GM LS cylinder head. Witha choice of NON-EFI with no injector bosses or EFI with 16injector bosses (8 undrilled) complete with fuel rails and cross over, designed to suit 14mm short length (33mm) fuel injectors. All bases have a provision for a LS style map sensor on the rear along with 1 x 3\/8” NPT and 1 x 1\/8” NPT ports with bungs.\u003c\/p\u003e\u003cp\u003eThese intake manifold bases are sold separately (as well as in complete intake manifolds and top plates) and can be paired with our modular top plates which are sold separately. Available in either natural cast or black power coated finishes.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"HI RISE EFI GM LS BASE INTAKE","offer_id":68357148868821,"sku":"AF6279-6004","price":1032.75,"currency_code":"USD","in_stock":true},{"title":"HI RISE NON EFI GM LS BASE","offer_id":68357148803285,"sku":"AF6279-6002","price":813.9,"currency_code":"USD","in_stock":true},{"title":"Low Rise EFI GM LS Cathedral Port Intake ManifoldBase, Black Finish Suit Modular Intake Manifolds","offer_id":68357148737749,"sku":"AF6279-5001","price":970.4,"currency_code":"USD","in_stock":true},{"title":"Low Rise EFI GM LS Rectangle Port Intake ManifoldBase, Black Finish Suit Modular Intake Manifolds","offer_id":68357148836053,"sku":"AF6279-6003","price":970.37,"currency_code":"USD","in_stock":true},{"title":"Low Rise NON-EFI GM LSCathedral Port Intake ManifoldBase, Black Finish Suit Modular Intake Manifolds","offer_id":68357148704981,"sku":"AF6279-5000","price":752.75,"currency_code":"USD","in_stock":true},{"title":"Low Rise NON-EFI GM LSRectangle Port Intake ManifoldBase, Black Finish Suit Modular Intake Manifolds","offer_id":68357148770517,"sku":"AF6279-6000","price":752.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6279-5000.jpg?v=1794980396"},{"product_id":"aeroflow-af6383-5001","title":"Carbon Intake Manifold Lid for Aeroflow or Holley Intake Manifolds – Aeroflow","description":"\u003cp\u003eThe Aeroflow Performance modular intake manifolds allow the end user to customize their intake manifold depending on each individual application. This 4 layer carbon top plate performs well and works great as a centre piece of any engine bay when paired with our modular bases (sold separately) to make a complete intake manifold for the very popular GM LS engine family.\u003c\/p\u003e\u003cp\u003eAeroflow offer either a hi rise manifold where bonnet modifications will be required. The long runner design allows for high rpm horsepower with big cube engines for a serious drag racer. A low-rise design manifold which allows it to fit under a stock bonnet in most street car applications. Short intake runners with tapered top are designed to increase air velocity and more evenly distribute airflow to all 8 cylinders improving performance and throttle response.\u003c\/p\u003e\u003cp\u003eThe modular design is made up of the bottom base which bolts to the cylinder heads and the top plate which bolts to the base with an O-ring to seal both components. This top plate features a short throttle body snout to accept a 102mm 4 bolt GM LS throttle body.\u003c\/p\u003e\u003cp\u003eThese top plates can be paired with our modular bases which are sold separately. Available in a complete 4 layer carbon fibre material for weight saving and stunning looks. Safe to use up to 30psi of boost. \u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":68357149032661,"sku":"AF6383-5001","price":1018.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6383-5001_27052026030859.jpg?v=1794980397"},{"product_id":"aeroflow-model-af64-618","title":"Aeroflow Intake Manifolds","description":"\u003cp\u003eBurst panels are designed to help save your intake manifold in the event of an engine backfire. A backfire can cause serious damage to your intake manifold either with material fatigue or in some cases completely destroying it. The burst panel is specifically designed to release this excess pressure that would be trapped inside the intake manifold with nowhere to go. The burst panel will blow a hole for the pressure to escape in the event of a backfire.\u003c\/p\u003e\u003cp\u003eThe bust panel itself is measures at 108mm x 60mm. The weld on flange dimension is 120mm long, 75mm wide and 12mm thick with 18 x M5 x 0.8mm (12mm UHL) stainless steel socket cap allen key screws.\u003c\/p\u003e\u003cp\u003eWe sell a variety of burst panel components from a weld on panel made from aluminium to install a burst panel on to an intake manifold. The burst panel plate by itself for when you blow a hole in one. As well as an install kit that includes the frame, burst panel and mounting hardware to install onto a weld on flange.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Burst Panel Install Kit | Suit Modular Intake Manifolds \/ Standard","offer_id":68357263818965,"sku":"AF64-4401","price":51.77,"currency_code":"USD","in_stock":true},{"title":"Replacement Burst Panel | Suit Modular Intake Manifolds \/ Standard","offer_id":68357263851733,"sku":"AF64-4403","price":10.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF64-4401.jpg?v=1794980628"},{"product_id":"aeroflow-af6999-1000","title":"Replacement O-Ring for Modular Top Plate – Aeroflow","description":"\u003cp\u003eThis replacement one piece viton O-ring is specifically designed to suit the Aeroflow Performance modular intake manifold top plates.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":68357293605077,"sku":"AF6999-1000","price":16.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6999-1000.jpg?v=1794980683"},{"product_id":"aeroflow-af6999-2000","title":"Ford Small Block Windsor Fuel Rail Kit for Air Gap Intake Manifold – Aeroflow","description":"\u003cp\u003eGive your Small Block Ford intake manifold the capabilityto flow some serious flow to feed even the most fuel hungryapplications. These Chevy fuelrails from Aeroflow Performance are specifically designed for use with the Small Block Ford with EFI bungs air gap intake manifold.It will not suit any factory Ford Windsor intake manifold.\u003c\/p\u003e\u003cp\u003eEach fuel railis precision CNC machined fromextruded 6063 aluminium with alarge internal diameter bore with -8ORB ports on each end and anodized black.\u003c\/p\u003e\u003cp\u003eThe injector bores are 14mm ID so factory injectors are permitted. This kit is compatible with all fuel typesincluding popular alcohol mixtures such as E85.\u003c\/p\u003e\u003cp\u003eThis kit includes all mounting hardware to mountto the intake manifold.\u003c\/p\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":68357293703381,"sku":"AF6999-2000","price":200.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1819\/4599\/files\/AF6999-2000.jpg?v=1794980685"}],"url":"https:\/\/autoplumb.com\/collections\/af-engine-components-engine-components-intake-manifolds.oembed","provider":"AutoPlumb","version":"1.0","type":"link"}